Positioning
Curtains can be installed in two ways:
Top - The curtain track is mounted directly on the roof, and the curtain track is mounted on the outside of the plaster line, so the plaster wire is obscured without affecting aesthetics.
Side mount - place the curtain track about 15 cm above the window to prevent light leakage.
The accuracy of drawing line positioning is related to the success or failure of curtain installation, first of all, measure the fixed hole distance, with the required mounting track size.
Install curtain rails
(1) Curtain rails are divided into single, double or three tracks. When the width of the window is greater than 1200mm, the curtain rail should be disconnected, broken bend staggered, bend should be flat curve, the length of the tie is not less than 200mm. Ming curtain box generally first set the track. Heavy curtain rails should be screwed; The dark curtain box should be rear-set track. Heavy curtain track small corners should be encrypted spacing, wood screw specifications are not less than 30mm.
(2) Install the lifting card, rotate the card 90 degrees to complete the connection with the track, with self-tapping screws to install the lifting card on the top plate. In the case of concrete structures, expansion required.
Install the curtain rod
(1) Correct the connection fixing, put the rod or wire on it, and pull it on the fixing. Do flat, just in agreement with the room standard.
(2) Installation of standard curtain track (dual rail), its base width should generally be more than 15CM, monorail can be reduced according to appropriate circumstances.
Adjust the position
Floor-to-ceiling curtains or curtains that hang over the table, the installation of the track should give way to the width of the window sill, so as to avoid the curtains when drooping blocked and appear indecent.
Pay attention to the actual wall
The requirements must not be hollow, otherwise when drilling, the surface is easy to crack.
